This is a high output commercial grade under sink water chiller that easily hooks up to your Reverse Osmosis RO or drinking water filter system, dispensing chilled refreshing water. Made of 100% stainless steel to preserve the purity of Reverse Osmosis water. Installs quickly and conveniently under the sink or beneath a cabinet countertop, directly connecting to your current dispenser water faucet. This unit is rated to dispense water up to 50F and works great with any filtered or Reverse Osmosis system.

The cooling capacity of a chiller is the amount of heat it can remove from a liquid in a specified time. This is measured in watts. The higher the cooling capacity, the more heat it can remove in a shorter period of time. The amount of heat removed is determined by the temperature change needed and the volume of the liquid being cooled.

Typically, there are two separate sub-systems in a chiller system that provide the cooling and water cooling processes. The refrigeration loop is where the thermodynamic processes take place, and the chilled water loop is a distribution system that delivers cold water to consumer units. Choosing the right chiller for an application involves understanding these processes and the requirements for a successful installation.

The size of a chiller is determined by the temperature change needed, the volume of the liquid to be cooled, and the desired temperature of the coolant. The temperature change is measured in degrees Fahrenheit (°F) or Celsius, and the volume of the liquid to be cooled is calculated by multiplying the mass of the liquid by its specific heat. These figures are then used to calculate the chiller tonnage required. under bench water chiller